CVE-2026-54058: Pillow: Out-of-bounds read via attacker-controlled row stride on Pillow's mmap path (McIdas AREA files)

High

OSV id
GHSA-62p4-gmf7-7g93
Also known as
BIT-pillow-2026-54058, CVE-2026-54058, PYSEC-2026-3493
Published
Last modified

Affected packages

PackageAffected versionsFixed in
pillow
PyPI
< 12.3.0 12.3.0

Versions we track that it affects: pillow 10.4.0

How to fix it

Upgrade pillow to 12.3.0 or later.

# in requirements.txt: change the line to pillow==12.3.0
pip install -r requirements.txt
  • If it is an indirect dependency, upgrade the package that depends on it, or add a minimum version constraint for it (e.g. in constraints.txt, or as a dependency in pyproject.toml).
  • Check the changelog for breaking changes (especially across major versions), update the lockfile with the package manager, and run your tests.

Not sure whether your project uses an affected version? Check your lockfile below for free.

Details

Summary

When Pillow loads an uncompressed image whose tile uses the raw codec and a mode in Image._MAPMODES, and the image was opened from a filename, it memory-maps the file and builds the image's row pointers directly into the mapping via PyImaging_MapBuffer (src/map.c). The per-row spacing (stride) is taken from the tile arguments. map.c validates offset + ysize*stride <= buffer_len but never checks that stride is at least the natural row width xsize * pixelsize.

The McIdas AREA plugin (McIdasImagePlugin.py) derives stride, offset, xsize, and ysize directly from attacker-controlled 32-bit header words with no validation. By supplying a stride far smaller than the row width, an attacker makes each row pointer read xsize*pixelsize bytes that run past the mapped region. Accessing the pixels (e.g. Image.tobytes(), getpixel, convert, save) then reads adjacent process memory (information disclosure) or faults (SIGBUS, denial of service).

Complete Code Trace

Step 1: McIdasImageFile._open - turns attacker header words into image size, file offset, and row stride with no validation.

# src/PIL/McIdasImagePlugin.py:41-70
s = self.fp.read(256)
if not _accept(s) or len(s) != 256:        # _accept: prefix == b"\x00\x00\x00\x00\x00\x00\x00\x04"
    raise SyntaxError(...)
self.area_descriptor = w = [0, *struct.unpack("!64i", s)]   # w[1..64] = signed BE int32, ALL attacker-controlled

if w[11] == 1:
    mode = rawmode = "L"                    # pixelsize 1, in _MAPMODES
elif w[11] == 2:
    mode = rawmode = "I;16B"                # pixelsize 2, in _MAPMODES
...
self._mode = mode
self._size = w[10], w[9]                    # (xsize, ysize)  <-- attacker
offset = w[34] + w[15]                       # <-- attacker
stride = w[15] + w[10] * w[11] * w[14]       # <-- attacker (set w[14]=0, w[15]=1 => stride=1)
self.tile = [
    ImageFile._Tile("raw", (0, 0) + self.size, offset, (rawmode, stride, 1))
]

Step 2: ImageFile.load (mmap branch) - selects mmap and delegates to map_buffer.

# src/PIL/ImageFile.py:322-348
if use_mmap:                                 # use_mmap = self.filename and len(self.tile) == 1
    decoder_name, extents, offset, args = self.tile[0]
    if (decoder_name == "raw" and isinstance(args, tuple) and len(args) >= 3
            and args[0] == self.mode and args[0] in Image._MAPMODES):
        if offset < 0:                       # only lower-bound guard on offset
            raise ValueError("Tile offset cannot be negative")
        with open(self.filename) as fp:
            self.map = mmap.mmap(fp.fileno(), 0, access=mmap.ACCESS_READ)
        if offset + self.size[1] * args[1] > self.map.size():   # == offset + ysize*stride; NO stride>=linesize check
            raise OSError("buffer is not large enough")
        self.im = Image.core.map_buffer(
            self.map, self.size, decoder_name, offset, args      # args = ("L", stride, 1)
        )

Step 3: PyImaging_MapBuffer - builds row pointers at stride spacing into the mmap; validates everything except stride >= row width.

/* src/map.c:65-140 */
if (!PyArg_ParseTuple(args, "O(ii)sn(sii)",
        &target, &xsize, &ysize, &codec, &offset, &mode_name, &stride, &ystep))
    return NULL;
...
const ModeID mode = findModeID(mode_name);          /* "L" */

if (stride <= 0) {                                  /* attacker sets stride=1 (>0) -> NOT recomputed */
    if (mode == IMAGING_MODE_L || mode == IMAGING_MODE_P) stride = xsize;
    else if (isModeI16(mode)) stride = xsize * 2;
    else stride = xsize * 4;
}

if (stride > 0 && ysize > PY_SSIZE_T_MAX / stride) {/* overflow guard only */
    PyErr_SetString(PyExc_MemoryError, "Integer overflow in ysize"); return NULL;
}
size = (Py_ssize_t)ysize * stride;                  /* = 1*1 = 1 */

if (offset > PY_SSIZE_T_MAX - size) { ... }
...
if (offset + size > view.len) {                     /* 1 + 1 = 2 <= 256 -> PASSES */
    PyErr_SetString(PyExc_ValueError, "buffer is not large enough");
    PyBuffer_Release(&view); return NULL;
}

im = ImagingNewPrologueSubtype(mode, xsize, ysize, sizeof(ImagingBufferInstance));
/* im->linesize = xsize * pixelsize = 200000  (the REAL per-row read width) */

/* setup file pointers -- NO check that stride >= im->linesize */
if (ystep > 0) {
    for (y = 0; y < ysize; y++) {
        im->image[y] = (char *)view.buf + offset + y * stride;   /* row points into mmap, spacing=1 */
    }
} else { ... }

im->linesize (the number of bytes any consumer reads per row) is xsize * pixelsize = 200000, but the row pointers are only stride = 1 byte apart and the buffer is only offset + ysize*stride = 2 bytes "claimed". Nothing reconciles the two.

Step 4: pixel access (Image.tobytes() → raw encoder copy1) - reads linesize bytes from im->image[0], i.e. xsize bytes starting at view.buf + offset, running far past the mmap.

```c /* the raw "L" packe

References

Am I affected?

Upload or paste your lockfile. We check every package version in it against OSV.dev, this advisory included, and email you the vulnerable ones with the version that fixes them. Free, and no account needed.

or paste its content

Needed when you paste. package.json and pyproject.toml only have version ranges: use the lockfile next to them.

Only package names and versions are checked; the file itself is not kept. We use your email to send this report and nothing else unless you tick the box above. Privacy policy.

About this data

Source: GitHub Advisory Database via OSV.dev (CC-BY 4.0). Severity comes from the advisory's own rating when it has one, else from its CVSS score.